Binks PX1304 Pogo Low Pressure Pumps

For High Volume Fluid Transfer & Spray Applications

Manufacturer: Binks

Part Number: PX1304

Description: PX1304 Pogo Pumps

Pogo Plus series, two-ball, double acting piston pumps are designed for the application and transfer of low-medium viscosity fluids. Models are available in Stainless Steel with either PTFE or UHMWE
packings and are compatible with a wide variety of materials including water or solvent borne paints and adhesives and most solvents. Pogo Plus pumps have a 4:1 ratio and are available with maximum pressure ratings of 290 psi or 500 psi.

Patented Air Motor Design

—Utilize AX55 air motor to provide quick changeover and reduced pulsation

Durable Pump Design
—Reduces maintenance cost

Pump Outfit Available with Trophy Gun
—Trophy guns available with a new lightweight and ergonomic design

5 Year Limited Warranty
—The finishing industry’s best warranty

APPLICATIONS

Furniture and Wood Cabinets

Truck and Bus

Adhesive Applications

Coating Supply

Solvent Supply for 2K Equipment

General Industry

Pump Performance

	PX1304-5U	PX1304-5P	PX1304-8U	PX1304-8P
Pressure Ratio:	4:1	4:1	4:1	4:1
Air Inlet Pressure:	0–72.5PSI (5)	0–72.5PSI (5)	0–116 PSI (8)	0–116 PSI (8)
Fluid Pressure:	0–290 PSI (20)	0–290 PSI (20)	0–500 PSI (34)	0–500 PSI (34)
Cycles Per Gallon:	47	47	47	47
Displacement Per Cycle:	2.7 (81cc)	2.7 (81cc)	2.7 (81cc)	2.7 (81cc)
Flow @60 Cycles/Min: Maximum recommended continuous cycle rate: Maximum recommended intermittent cycle rate: Maximum Operating Temperature: Piston diameter: Nominal motor stroke: Air Inlet Connection: Outlet Size: Weight:	1.3 Gal (4.91 l/m) 20 cycles/min. [40 strokes] 40 cycles/min. [60 strokes] 160°F [71° C] 3.3 in (85 mm) 3 in [75 mm] 3/8″ NPS/BSPP (female) 1/2″ NPT(F) 12.6 Lb [5.7 Kg]	1.3 Gal (4.91 l/m) 20 cycles/min. [40 strokes] 40 cycles/min. [60 strokes] 160°F [71° C] 3.3 in (85 mm) 3 in [75 mm] 3/8″ NPS/BSPP (female) 1/2″ NPT (F) 12.6 Lb [5.7 Kg]	1.3 Gal (4.91 l/m) 20 cycles/min. [40 strokes] 40 cycles/min. [60 strokes] 160°F [71° C] 3.3 in (85 mm) 3 in [75 mm] 3/8″ NPS/BSPP (female) 1/2″ NPT (F) 12.6 Lb [5.7 Kg]	1.3 Gal (4.91 l/m) 20 cycles/min. [40 strokes] 40 cycles/min. [60 strokes] 160°F [71° C] 3.3 in (85 mm) 3 in [75 mm] 3/8″ NPS/BSPP (female) 1/2″ NPT (F) 12.6 Lb [5.7 Kg]
Packing Material:	UHMW	PTFE	UHMW	PTFE

Spray Finishing Outfits

Pump:	PX13045U	PX13045U
Gun:
Air Control:
Air Hose 25 Foot:
Fluid Hose 25 Foot:
Drum Bung Adapter:

Ref. No.	Part No.	Description	Qty
1	0114-014351	HANDLE	1
2		RETAINING RING	2
3		SOCKET HEAD CAP SCREW	3
4		AX55S AIR MOTOR (8 BAR) AX55S AIR MOTOR (5 BAR)	1
5		ROD CLIP	2
6	41-28326	TIE ROD (6″ OAL) TIE ROD (8″ OAL)	3
7		MOTOR ROD ADAPTER	1
8		POGO FLUID SECTION (PTFE) POGO FLUID SECTION (UHMW)	1
9		GROUND WIRE KIT	1
10		UPPER GUARD	1
11		LOWER GUARD	1
12	41-166001	SET SCREW	3

NOTE: Please measure the overall length of item 6, Tie Rod, to ensure the correct length.

Literature:

Binks charges a significant fee to drop ship orders of less than. Therefore, any parts orders under will be added to our stocking orders and then reshipped to you. If you need these products faster you can contact us for an expedited drop shipping fee.

Contact: 503-545-3176