Desco 19595 Viper Ionizing Air Gun with Power Adapter & 6‘ Hose, 100-240V

Point-of-Use Compressed Air (7-87 psi) Ionizing Blow Off Gun neutralizes electrostatic charges to eliminate attraction, visual imperfections, and contamination issues by dislodging charged dust and debris.

Fast Discharge Times with ±15 Volt Offset Voltage Balance.

Meets required limits of ANSI/ESD S20.20 and ESD TR53.

High Frequency Piezo AC with Transformer Inside of Hand Piece

Consistent ionization performance with longer hose lengths (6-foot hose included) with no additional remote console or separate high voltage power supply required.

Balanced: Lightweight Ergonomic Design (Less Than 0.5 Pounds)

Aligns the center gravity with the operator’s gripping hand for ease of use by operators.

Long Handle-Trigger to reduces stress on operator’s fingers.

Slotted Nozzle Tips

Meets OSHA requirement for pressure relief.

Clean Dry Air (CDA) or Nitrogen

Use with standard shop air or purchase the 19596 tip for use with Nitrogen.

10 Foot (3 Meter) Power Cable (100~240V) to 24VDC Power Adapter

Use with multiple power sources by changing blades on the power adaptor.

Status LEDs illuminate when the trigger is held down and to indicate that the gun is outputting ionized air.

NIST Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology.

100-240V Power Adapter with Interchangeable Plugs

Works with standard electrical systems in North America, United Kingdom, Japan, Asia and Europe

Specifications

Power Supply Input Voltage: 100-240V, 50/60 Hz

Power Supply Output Voltage: 24 VDC

Operating Temperature: 32° F to 104 ° F (0 to 40° C)

Dimensions: 6.5″ x 5.4″ x 1.0″ (165 mm x 136 mm x 25 mm)

Weight: 0.4 lbs (0.2 kg)

Balance: ±15 V

Ozone: <0>

Supply Pressure: 7.0 psi to 87 psi

Minimum Airflow: 13 CFM

Gas Input: Clean Dry Air (CDA) or Nitrogen

Gas Connection 6.0 mm port

Enclosure Gun – PBT polymer Nozzle – PPS polymer

Product Overview