Desco 60468 Chargebuster® 3-Fan Overhead Ionizing Blower with 2 Lights, 120V

Three Fan Steady-State DC Ionization for 2.0′ x 5.0′ Coverage Area. Neutralizes electrostatic charges on insulators and ungrounded conductors within the coverage area.

3.0 Seconds or Less Discharge Time with ±10 Volts Offset Voltage (Balance)

Meets the required limits for ionization use in electronics manufacturing areas per ANSI/ESD S20.20 and ESD TR53

Two 700 Lumen LED Panel Lights (Cool White) add additional light to operator work area for improved visibility

3.0 Position Fan Speed: Low, Medium, High. Ionization performance is consistent at all speeds and allows for use with sensitive applications, such as calibration, test, or repair procedures

Sealed Plenum Air Flow prevents contamination from being introduced to workstation

Auto-Feedback System (Audible And Visual Alarm Through Single Tri-Color LED). Unit will automatically shut down and alarm if/when supply voltage drops

120/220V Input Voltage Selectable allows this unit to be used with 110V or 220V power sources

Replaceable Emitter Pins field replaceable emitter pins allow for minimal downtime

Compatible Ionizer Motion Sensor 60509, activates an ionizer when an operator is present and deactivates when the workstation is vacant to conserve energy and reduce ionizer maintenance

NIST Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology.

Made in the United States of America.

Specifications

Typical positive and negative discharge times (1000V to 100V) measured using ANSI/ESD STM 3.1 are shown in the “Neutralization (Discharge) Times” section. The performance of the ionizer was measured with the unit positioned as shown, with the fan speed on high and without a filter.

Input Voltage and Frequency: Internally selectable for 100-120VAC, 50/60 Hz

Power Consumption: 3-Fan Overhead: 36 W

Dimensions: 3-Fan Overhead: 30.9″ H x 6.6″ W x 37.3″ L (99 mm x 168 mm x 947 mm)

Weight: 3-Fan Overhead 10 lbs. (4.5 kg)

Balance (Offset Voltage) at 18″: ±10 V typical ±20 V maximum

Neutralization (Discharge) Time at 18″: < 3.0 seconds

Airflow (three-speed fans): 3-Fan Overhead: 150-300 CFM

Emitter Points: 0.050″ diameter tungsten Ion Emission Steady-state DC with sense feedback Fuse 400 mA slow blow

High Voltage Power Supply: 5.5 kVDC nominal

Ozone: <0>

Enclosure Powder: coated steel

Mounting Options: Rigid-mounted or suspended from ceiling

Lighting: 700 lumen each Cool white color 12 year estimated life expectancy (based on an average use of 10 hours per day)

Certifications: CE

Product Overview