Two 3-Blade Fans with Steady State DC Ionization For 2.0′ X 4.0′ Coverage Area
Specially designed fan modules create better coverage (2.0′ x 4.0′), consistent offset voltage (balance) ±10 Volts, and superior discharge times(<3>
Auto-Feedback System (Audible And Visual Alarm Through Single Tri-Color LED)
Unit will automatically shut down and alarm if/when supply voltage drops
120/220 VAC Input Voltage Selectable
Unit can be used with 110V or 220V power sources
3-Position Fan Speed: Low, Medium, High
Ionization performance is consistent at all speeds and allows for use with sensitive applications, such as calibration, test, or repair procedures
Replaceable Emitter Pins
Field replaceable emitter pins allow for minimal downtime
Compatible Ionizer Motion Sensor 60509
Activates an ionizer when an operator is present and deactivates when the workstation is vacant to conserve energy and reduce ionizer maintenance
Made in the United States of America
Specifications
Typical positive and negative discharge times (1000V to 100V) measured using ANSI/ESD STM 3.1 are shown in the “Neutralization (Discharge) Times” section. The performance of the ionizer was measured with the unit positioned as shown, with the fan speed on high and without a filter.
Input Voltage and Frequency: Internally selectable for 100-120 VAC, 50/60 Hz
Power Consumption: 2-Fan Overhead: 24 W
Dimensions: 2-Fan Overhead: 3.9″ H x 6.6″ W x 22.3″ L (99 mm x 168 mm x 566 mm)
Weight: 2-Fan Overhead: 7 lbs (3.2 kg)
Balance (Offset Voltage) at 18″: ±10 V typical ±20 V maximum
Neutralization (Discharge) Time at 18″: < 3.0 seconds
Reviews
There are no reviews yet.