DeVilbiss Advance HD Pressure Feed Spray Gun

The All Purpose Mid-Sized Pressure Spray Gun

Manufacturer: DeVilbiss

Part #: ADV-PXXX-YY

Description:

The DeVilbiss Advance HD Gravity Feed Gun utilizes a wide range of Conventional, HVLP, and Trans-Tech air caps to provide exceptional atomization for coating wood, metal, plastic, ceramic and composite substrates with most types of solvent, waterborne, high solids and 2K materials.

Conventional is the most established method of air atomization used on “conventional” spray guns, using relatively high velocity compressed air to provide good atomization of the sprayed material. However, this process results in low paint transfer efficiencies due to the ‘bounce-back’ and ‘overspray’ generated. Air Cap Pressure is typically 30-40psi.

HVLP (High Volume Low Pressure) is a “compliant” atomization method using larger compressed air volumes at lower pressures to atomize the coating. It has a much higher transfer efficiency than Conventional. However, the droplet size produced tends to be slightly larger, sometimes resulting in lower quality finish. Air Cap Pressure is 10psi in compliance with global environmental legislation to provide greater than 65% transfer efficiency.

Trans-Tech (compliant) atomization was introduced by DeVilbiss to combine the benefits of both Conventional and HVLP atomization methods. Trans-Tech utilizes more compressed air energy for the atomization process producing much higher Transfer Efficiency of coating material than Conventional. This ‘complies’ with global environmental legislation by being able to transfer at least 65% of the sprayed material to the component. Air Cap Pressure is typically 20-45psi. HVLP has mostly been replaced by DeVilbiss Trans-Tech Atomization in most applications due to its superior quality finish.

Air Caps are compatible with all Advance HD standard and hardened fluid nozzle sizes.

Advance HD’s unique high capacity airflow and outstanding atomization characteristics are combined with a separate “balanced” air valve design for lighter trigger pulls to provide an unrestricted flow of compressed air through the gun body; this coupled with light, feel-right comfort is an unbeatable combination. Advance spray guns are ideal for small operations or high volume spraying, with the added bonus of instantly improved finishing productivity.

Air Cap Type and Fluid Tip Available:

Air Cap # and Type	Fluid Tip Sizes (mm)
430 Conventional	1.0, 1.4, 1.8
497 Conventional	1.0, 1.4, 1.8
506 HVLP	1.0, 1.4
507 HVLP	0.85, 1.0, 1.4, 1.8, 2.2
510 T-T	0.85, 1.0, 1.4, 1.8
513 T-T	1.2, 1.4
522 T-T	0.85, 1.0, 1.4, 1.8, 2.2

Specifications:

Air Cap # and Type	Air Inlet Pressure	Air Consumption	*Fan Pattern / Size
430 Conventional	50 psi (3.5 bar)	12.0 scfm (339 l/m)	7.9″ (200 mm)
497 Conventional	50 psi (3.5 bar)	18.0 scfm (510 l/m)	12.0″ (305 mm)
506 HVLP	19 psi (1.3 bar)	10.6 scfm (300 l/m)	12.0″ (305 mm)
507 HVLP	22 psi (1.5 bar)	17.3 scfm (490 l/m)	15.7″ (400 mm)
510 T-T	29 psi (2.0 bar)	10.0 scfm (283 l/m)	10.6″ (270 mm)
513 T-T	29 psi (2.0 bar)	14.1 scfm (394 l/m)	13.8″ (350 mm)
522 T-T	29 psi (2.0 bar)	14.5 scfm (410 l/m)	13.8″ (350 mm)

*Fan size will vary according to viscosity and pressure. Measured at a distance of 8″

Literature:

(HVLP and Trans Tech* 522 T-T uses 510/513 needle/nozzles)

Parts and Accessories:

Ref. No.	Part No.	Description
1	–	Air Cap Retaining Ring
2	–	Slip Ring
3	–	Air Cap
4	JGA-156-K5	Air Cap Retaining Clip
5	–	Retaining Ring Seal
6		Aircap & Ring
7		Air Cap Retaining Ring & Seals
8		Fluid Nozzle
9		Separator
10		Fluid Nozzle Kit
12*	–	Body Bushing Seal
13	–	Body Bushing
14		Body Bushing & Seal
15		Fluid Needle
		Fluid Needle (Plastic Tip)
16*	–	Needle Spring
17*	–	Needle Spring Pad
18	–	Fluid Adjusting Knob
19		Fluid Adjusting Knob, Spring & Pad Kit
20*	–	Retaining Clip
21	–	Spreader Valve Body
22*	–	Spreader Valve Seal
23	–	Spreader Valve Adjusting Knob
24*	–	Spreader Valve Pin
25		Spreader & Airflow Valve Assembly
26*	–	Needle Packing
27*	–	Packing Spring
28*	–	Packing Nut
29		Packing, Spring & Packing Nut Kit
30	–	Air Valve Body
31	–	Air Valve Cage
32	–	Air Valve Poppet
33	–	Air Valve Spring
34	–	Air Valve Spring Pad
35		Air Valve Seal
36		Air Valve Assembly
37*	–	Trigger Stud Screw (T20 TORX)
38	–	Trigger
39*	–	Trigger Stud
40		Trigger, Stud & Screw Kit
42		Air Inlet
43	SN-26-K4	Colour ID Ring Kit (4 Colours)
45		Stud and Screw kit
46	–	Air valve Service Too
47		Torx Key
54	–	Fluid Inlet Connector
55	–	Lock Nut
56	–	Seal
57		Fluid Inlet Connector Kit
*		Spray Gun Repair Kit (Includes items marked with *)
		Spanner, Trox Driver and Brush Kit