GRACO 248324 – Thermal Relief Installation Kit, 1600 PSI

GRACO 248324 – Thermal Relief Installation Kit, 1600 PSI

Specifications

Max Working Pressure: 1600 PSI (110 bar) maximum working pressure

Maximum Fluid Relief Pressure: 1600 PSI (11 MPa, 110 bar)

Compatible Equipment

Series A, Fire-Ball 425 10:1 pumps

Related Parts

237893 – 237893 Pressure Relief Kit, 900 PSI (62 Bar) Maximum Working Pressure

235998 – Kit Installation

237601 – Kit Installation

237904 – 237904 Kit Installation, Male Threads On Tee, 1600 PSI (11 MPa, 110 Bar)

238899 – Pressure Relief Kit 238899, 150 PSI (1 MPa, 10 Bar)

240429 – Thermal Relief Installation Kit, 11-1/2 NPT(M) Threads Mentioned In Installation

248296 – Kit Installation Therm Relief

238125 – Thermal Relief Bung Adapter Kit 3:1, 5:1 & 10:1 Universal Pumps

Install on the dispensing valve side of the pump to assist in relieving pressure in the pump, hose, and dispensing valve due to heat expansion This is a thermal relief kit. The manual notes that thermal relief kit selection may need to change from application to application depending on pump air operating pressure and fluid working pressures of system components. The lower relief pressure may ensure other (non-GRACO) in-line components do not fail due to over-pressurization. This is part of a family of pressure relief kits. For kit 248324 specifically, the installation follows steps 1-3, 7, 9, and 10 only (not the full 1-8 and 10 sequence). Installation involves applying thread sealant to nipple threads and using the nipple to thread the tee to the pump fluid outlet. The free end of hose routes into supply drum or tank.

Reference Manuals

306520 (Page 7) Fire-Ball 300 and Fire-Ball 425 Drum or Tank Supply Pumps

308403 (Page 2) Pressure Relief Kits

312668 (Page 27) LDP5 (Preset) Electronic Metered Dispense Valves

312789 (Page 15) SDV15 and XDV20 Dispense Valve

313046 (Page 34) Matrix 5 and Matrix 15 Meter