HERO HL350-A95 Conversion Kit From Countertop To Floor Model, S24XX SERIES

Conversion Kit From Countertop To Floor Model, S24XX SERIES

Manufacturer: HERO

Part Number: HL350-A95

Description: Conversion Kit From Countertop To Floor Model, S24XX SERIES

Floor Stand to Countertop Conversion

Unplug the power cord to remove all power from the mixer.

Lay the mixer over on its side.

Remove the four bolts and lock washers underneath the mixer located in the extreme corners of the stand.

DO NOT remove the 3 nuts in the center of the bottom of the mixer that fasten the shake frame to the base.

After removing the 4 bolts and lock washers, separate the stand

Unscrew the 4 feet from the floor stand base.

Reinstall the 4 feet along with the lock washers in the bolts holes of the previously removed 4 bolts.

The lock washers should be installed between the mixer and the foot lock nut.

Set the mixer feet so there is a clearance of 1 3/4 inches between the mixer and the floor.

Note the clearance at the bottom of the mixer will allow for the paint containment tray to slide underneath the mixer.

Rotate the mixer to the upright position. Level the mixer.

1. The reverse of this procedure can be done to change a countertop unit to a floor stand unit.

Tariff Notice:
Please note that these products are sourced internationally and may be subject to additional import tariffs. As a result, your final order total may include an upcharge to cover these tariff-related costs. We strive to keep all fees transparent and will notify you of any adjustments before processing your payment. Thank you for your understanding and support.