M+A Matting 4411/4412/4413 Hog Heaven® Drainable Indoor Wet/Dry Tiles & Mats

Recommended Uses

Recommended for indoor use in industrial settings such as manufacturing facilities, distribution centers, machine shops, and areas that have liquids present.

Sizes

Please note, mat sizes are approximate as rubber shrinks and expands in conjunction with temperature and time. Tolerable manufacturing size variance is 3-5%.

Specifications

Construction

Material: Nitrile rubber

Overall Thickness: 3/4″ (0.75″ )

Standards & Testing

Passes flammability standard BS-4790 Metal nut Method

Cleaning Instructions

Hog Heaven Drainable mats and tiles can be cleaned using the instructions below:

Scrub with a deck brush (as needed) using a detergent with a neutral pH Rinse with a hose or pressure washer. Hang to dry.

Always make sure the mat is dry before placing it back in service.

Installation Instructions

There are three components in the Hog Heaven Tile System: the corner tile, the side tile, and the middle tile.

The corner tile has a border on two adjacent sides. The side tile has a border on one side. The center tile has no borders.

How to Cut Hog Heaven Tile Corners:

You will need cut-resistant gloves, a linoleum knife, and a metal straight edge.

To cut an inside corner on modular tiles, lay out the entire area of tiles making sure to overlap the side tiles forming the desired inside corner.

Lay a metal straight edge at a 45 degrees angle on top of the inside corner. Make sure to lift up the top overlap edging with the metal edge in place to see where the cut will end up to ensure you will be satisfied with the location.

Hold the metal straight edge firmly by placing downward pressure on it. Using a linoleum knife, make one firm, clean cut through both tiles. A utility knife will not cut deep enough through both tiles, and you will end up making two or three cuts (and the angles may not line up perfectly).

You should have two pieces from each tile after the cut is made. Remove those pieces.5. After making the cut, lay the inside corners of the two tiles side by side. Some users choose to glue the corner together. This can be done by adding a few drops of super glue to one side of the edging and attaching it to the other.

Product Overview

More Information

SKU	G101342
Part No.	4411/4412/4413
Brand	M+A Matting
Thickness	3/4"
Material	Nitrile
Type	Wet & Dry Applications
Model / Series	Hog Heaven