Permabond 200 Fast Setting Cyanoacrylate Adhesive, Clear, 1 oz. Bottle

Physical Properties of Uncured Adhesive

Chemical composition: Ethyl cyanoacrylate

Appearance: Colourless

Viscosity @ 25°C: 1,500 mPa.s (cP)

Specific gravity: 1.05

Typical Curing Properties

Maximum gap fill: 0.38mm (0.015″)

Fixture/handling time* (0.3 N/mm² shear strength is achieved):

15 seconds (Steel)

15 seconds (Buna N Rubber)

15 seconds (Phenolic)

Full strength: 24 hours

*Handling times can be affected by temperature, humidity, and specific surfaces being bonded. Larger gaps or acidic surfaces will also reduce cure speed but this can be overcome by the use of Permabond C Surface Activator (CSA) or Permabond QFS 16.

Typical Performance of Cured Adhesive

Shear strength* (ISO4587):

Steel 22 N/mm² (3200 psi)

Aluminium 8 N/mm² (1200 psi)

Impact strength (ASTM D-950): 3-7 kJ/m² (1.4-3.3 ft-lb/in²)

Dielectric strength: 250 V/mil

Hardness (ISO868): 85 Shore A

*Strength results will vary depending on the level of surface preparation and gap.

Product Overview

More Information

SKU	I167185
Part No.	CA002000001Z0101
Brand	Permabond
Type	Cyanoacrylate
Volume	1 oz. (28.4g)