Permabond 802 High-Temperature Cyanoacrylate Adhesive, Clear, 1 oz. Bottle

Physical Properties of Uncured Adhesive

Chemical composition: Ethyl cyanoacrylate

Appearance: Colourless

Viscosity @ 25°C: 90-110 mPa.s (cP)

Specific gravity: 1.1

Typical Curing Properties

Maximum gap fill: 0.15mm (0.006″)

Fixture/handling time* (0.3 N/mm² shear strength is achieved):

10-15 seconds (Steel)

10-15 seconds (Buna N Rubber)

10-15 seconds (Phenolic)

Full strength: 24 hours

*Handling times can be affected by temperature, humidity, and specific surfaces being bonded. Larger gaps or acidic surfaces will also reduce cure speed but this can be overcome by the use of Permabond C Surface Activator (CSA) or Permabond QFS 16.

Typical Performance of Cured Adhesive

Shear strength** (ISO4587)

Steel 19-23 N/mm² (2800-3300 psi)

ABS>6 N/mm² (>870 psi)*

PVC>5 N/mm² (>1450 psi)*

Polycarbonate 6 N/mm² (870 psi)

Coefficient of thermal expansion: 90 x 10^-6mm/mm/°C

Coefficient of thermal conductivity: 0.1 W/(m.K)

Hardness (ISO868): 85 Shore D

Dielectric Strength: 25kV/mm

*Substrate failure
**Strength results will vary depending on the level of surface preparation and gap.

Product Overview

More Information

SKU	I167220
Part No.	CA008020001Z0101
Brand	Permabond
Type	Cyanoacrylate
Volume	1 oz. (28.4g)