Permabond UV649 Fast Curing UV-Curable Adhesive, Clear, 1 Liter Bottle

Physical Properties of Uncured Adhesive

Chemical composition: Methacrylate ester

Appearance: Colourless, clear

Viscosity @ 25°C:

20rpm: 20,000-30,000 mPa.s (cP)

2.5rpm: 80,000-150,000 mPa.s (cP)

Specific gravity: 1.1

Typical Curing Properties

Typical fixture time (acrylic)*

Low power 4mW/cm² battery lamp: 10secs

LED 100mW/cm² lamp: 4 secs

UV light guide 30W/cm²: 2 secs

Cure wavelength 365 – 420 nm**

*The cure time depends on the power of the UV lamp, its spectral output, the distance between the lamp and the components, and the transmission characteristics of the substrates.

**LED UV lamps have a narrow range of spectral output. It is important to check suitability with Permabond to match the LED lamp’s peak wavelength with that of the adhesive’s photoinitiator to ensure optimal adhesive cure.

Typical Performance of Cured Adhesive

Overlap shear strength (ISO4587)

Polycarbonate:>7 N/mm² (>1000 psi)*

PVC:>5 N/mm² (>700 psi)*

PC to ABS:>7 N/mm² (>1000 psi)*

Acrylic:>1.5 N/mm² (>220 psi)*

Tensile strength (ISO37): 15 N/mm² (2200 psi)

Refractive index: 1.490

Elongation at break (ISO37):>70%

Hardness (ISO868): 50-65 Shore D

Dielectric strength: 25-30 KV/mm

Dielectric constant 1MHz@25°C: 4

Water absorption (ISO62) 2 hours in boiling water: <5>

*Substrate failure was observed

Product Overview

More Information

SKU	I167332
Part No.	UV006490001L0101
Brand	Permabond
Type	UV Adhesive
Volume	1 Liter