Pirate Brand, S-Series – BIG GUN™, 6.5 cu ft. – Blast Pot, Portable, Pressure HOLD System, 12VDC Electric Controls

Pirate Brand, S-Series – BIG GUN™, 6.5 cu ft. – Blast Pot, Portable, Pressure HOLD System, 12VDC Electric Controls

Manufacturer: Pirate Brand

Part Number: 888-0532-33904PB

Description: Portable abrasive blaster, 6.5 cu. ft.,150 PSI (10.3 BAR), pressure hold system with 12VDC electric controls, AAV / APVII™ w/tungsten-carbide sleeve valves & moisture separator.

WHEN USING STEEL ABRASIVES, ELECTRIC CONTROL HANDLE #2 (888-2263-401PB) AND SEALED CONNECTOR(S) (PB-31131) ARE REQUIRED

Includes:

BIG GUN™ 1-1/2” Automatic Air Valve

BIG GUN™ Full Port Blast Hose Connection

55’ X-Treme™ Duty Control Cord Assembly

Electric Control Handle #2

Product Highlights:

A 6.5 CU. FT. CAPACITY (185 LITERS)
1. 150 PSI VESSEL (10.3 BAR)
2. A.S.M.E. SECTION VIII DIVISION 1
3. C.R.N. FOR ALL PROVINCES
B. PRESSURE HOLD SYSTEM
1. REDUCES ABRASIVE CONSUMPTION
2. REDUCES MOISTURE PROBLEMS
3. SMOOTHER STARTS & STOPS
C. ELECTRIC CONTROLS 12VDC
1. WHEN RUNNING OVER 100 FEET OF BLAST HOSE THIS ADDS ADDITIONAL SPEED TO STOPPING & STARTING THE BLASTING OPERATION
2. HELPS WITH FREEZING PROBLEMS IN COLD WEATHER
D. BIG GUN FULL FLOW SYSTEM PROVIDES
1. A ZERO PRESSURE DROP PATH FOR AIR & ABRASIVE TO TRAVEL TO THE BLAST NOZZLE FOR EVERY 1 PSI GAINED OR LOST IN ABRASIVE BLASTING = 1.5% PRODUCTION
2. A MUST FOR #7 & #8 NOZZLES
3. PREMIUM APVII ABRASIVE METERING VALVE STANDARD
4. FULL PORT COUPLING BLAST HOSE CONNECTION PROVIDES AN UNRESTRICTED PATH FOR AIR & ABRASIVE TO TRAVEL TO THE NOZZLE
E. HEAVY DUTY BIG GUN MOISTURE SEPARATOR
F. 1-1/2″ GALVANIZED PIPING FOR CORROSION RESISTANCE
G. HEAVY DUTY FULL PORT BALL VALVES
H. EXTENDED LIFE SCHEDULE 80 HEAVY DUTY NIPPLE
1. WITHSTANDS ABRASIVE WEAR FOR LONGER LIFE
I. BOLT CLAMPS ON PUSHER LINE MAKE FIELD REPAIRS EASIER
J. NORMALLY CLOSED VALVES
1. AUTOMATIC PLUNGER VALVE II (APVII) PREMIUM ABRASIVE METERING VALVE WITH QUADRUPLE PLUNGER SEAL ARRANGEMENT SOLVES THE AIR & ABRASIVE CARRY OVER PROBLEM AS WELL AS THE PLUNGER & SEAL JAMMING PROBLEM NORMALLY ASSOCIATED WITH REGULATED LOW PRESSURE BLASTING APPLICATIONS AND OR THE USE OF STEEL ABRASIVE. SOLID MACHINED TUNGSTEN CARBIDE PLUNGER & SLEEVE PROVIDES FAR SUPERIOR WEAR RATES AND 100% CONSISTENT TOLERANCES. 1″ NPT CLEANOUT PORT GIVES ACCESS TO OBSTRUCTIONS THAT MAY BE BRIDGING OVER THE METERING PORT ALSO ALLOWS YOU TO DRAIN THE VESSEL WITHOUT REMOVING THE VALVE.
2. FULL FLOW AUTO AIR VALVE FOR FAST STARTS & STOPS
3. HEAVY DUTY FILTERED CONTROL VALVE REDUCES STOPPING TIME WHEN CONTROL HANDLE IS RELEASED
K. BLOW DOWN MUFFLER REDUCES UNNECESSARY LOUD NOISE
L. INCLUDES LOADING SKID/VALVE GUARD

Compatible with the following OEM manufacturers –

OEM Manufacturer	Part No.
SCHMIDT MANUFACTURING / U.S. FILTER / AXXIOM MANUFACTURING	0531-338-11
SCHMIDT MANUFACTURING / U.S. FILTER / AXXIOM MANUFACTURING	0531-339-11

TFS is not affiliated with nor is it endorsed by the above manufacturer(s). The product depicted above is not produced or authorized by the above manufacturer(s), with the exception of Forecast Sales/Pirate Brand.

Literature:

You will be contacted with a freight quote for shipping. Forklift may be required at time of delivery