Prostat PFM-711B Handheld Electrostatic Field Meter

What’s Included

PFM-711B Electrostatic Field Meter

PFM-700C Case with Zipper

9 Volt Alkaline Battery

Product Overview

Uses a Chopper-Stabilized Sensor
The PFM-711B is an accurate, portable electrostatic field measuring device that is easy to use and designed for one hand operation. The PFM-711B is a digital, electronic chopper design, which allows the instrument to make electrostatic field measurements in areas where ionized air is present. Used by itself, the PFM-711B will measure electrostatic fields emanating from virtually any flat surface or object.

Measure in 1 Volt and 10 Volt Increments
The PFM-711B uses a dual range for measuring surface voltage and electrostatic potentials in both positive and negative polarity charges. In the kV/Inch range, the PFM-711B will indicate electrostatic field voltage from 0 to ±20,000 volts in 10 volt increments at 1″ (25mm) distance from the charged surface. In the V/Inch range, the field meter measures field density from 0 to ±1,999 volts in 1 volt increments at 1″ (25mm) distance from the charged surface. The instrument is easy to use and its controls are designed for one hand operation.

Provides a Ground Reference
The PFM-711B Field meter case is conductive. It provides the ground reference for its measuring circuit. For accurate measurements, it is necessary that the person holding the meter be properly grounded, or the meter has a ground connection made to the 10 mm snap fastener mounted on back of case. Ground the case by wearing a functional wrist strap that is properly grounded. Turn the meter on and select the desired range. Adjust the display to zero (0) volts by pressing the ZERO control.

Bulls Eye for Accurate Measurements
The ranging lights help position the instrument for accurate measurements. Align the front sensor of the PFM-711B Field Meter approximately 1″ (25mm) from the surface or object being measured. Move the instrument toward, or away from the surface until the ranging lights are focused on the test surface. Once the field meter is properly positioned, the PFM-711B will indicate the electrostatic field measured on its display.

Use it with a Recording Device
The PFM-711B is the most flexible field meter in the ESD control marketplace. Combined with a variety of accessories, it can perform many different measurements to analyze the static sensitive process or environment. The analog output allows documentation of measurements when used in conjunction with X-Y plotter, analog data recording device, or the Prostat PGA-710B Autoanalysis System. (Recording device and cable not included.)

Long Lasting Battery
The PFM-711B uses a 9 volt alkaline battery (included), which provides an approximate life of 30 hours. The display is designed to indicate when the battery is low. The low battery indicator is conveniently programmed to come in at 7.2 DC volts, which is the minimum voltage required for accurate measurements.

Technical Specifications

PFM-711B Electrostatic Field Meter Specifications

Performance

Overall Range:

Low Range: 0 V to ±1999 V

High Range: 0 V to ±19.99 kV

Accuracy: Voltage Monitor Output: Better than ±5% of reading, ±10 mV

Voltage Display: Better than ±5% of reading, ±2 counts

Stability ±10 counts

Voltage Monitor

Output: ±20.0 kV meter reading equals ±2.0 Volt output

Ratio:

Low Range: 0 to 2,000 volts is equal to ±0.2 volts output

High Range: 0 to 20,000 volts is equal to ±2 volts output

Front Panel

Display:

Number of Characters: 3.5 digits

Character Format: 7-Segment

Character Size: 12.70mm H x 7.62mm W

Automatic polarity, LOW BATTERY indicator

Range:

V / Inch: 0 to ±1999 V / inch

kV / Inch: 0 to ±19.99 kV / inch

Display Resolution:

Low Range: 1 Volt increment

High Range: 10 Volts increments

Sampling Rate: Display readings are updated every 0.5 seconds Analog readings are taken every 100mS, or 10 times per second

Low Battery: Low battery indicator comes on at 7.4 Volts

Power

Input: 9 VDC alkaline battery (included)

Battery Life: Approx. 20 hours (of continuous use)

Grounding

Case: Circuit grounded through conductive case

Ground Snap: 10 mm snap fastener mounted on back of case

Measurement Distance: 1″ ± 1/64″ (25mm ± 0.5mm)LED distance indicator; aligned targets indicate 1 inch (25 mm)

Controls

Keypad: A custom membrane controls the different functions

ON/OFF:

Short press to turn the instrument ON

Long press to turn the instrument OFF

Range: Selects between V/Inch (0-2000V) and kV/Inch (0-20kV)

Zero: Adjusts the displayed value to Zero (0)

Hold: Captures and holds a stable measurement

Output

Analog Output:

2.5 mm jack (3/32″) audio jack

2 Volts output corresponds to 20 kV

Response Time: Less than 180ms (90-10%)

Sensor Noise Signal (Typical)¹:

Maximum Voltage: +3 volts

Minimum Voltage: -5 volts

Environment

Operating Temperature: 10°C to 30°C (50°F to 80°F)

Operating Relative Humidity: 0% – 80%, non-condensing

Operating Altitude: 2000 m

Physical Specifications

Size (with ground snap attached): 27.2 mm H x 61.5 mm W x 105.9 mm L (1.07″ H x 2.41″ W x 4.17″ L)

Weight: 142 g (5.0 oz.) with battery

Warranty:

2 years on circuit board, display and membrane

1 year on sensor²

¹ Typical specifications are not guaranteed.
² Warranty on the sensor limited to a defective sensor that was not dropped or used for measuring a source greater than 20kV.

Product Overview

More Information

SKU	I339920
Part No.	PFM-711B
Brand	Prostat
Includes	Battery, NIST Certificate