SCS 770112 Ion Pro™ Steady State 2-Fan Overhead Ionizing Blower, 120V

Two fan steady-state DC ionization for 2′ x 4′ coverage area and neutralizes electrostatic charges on insulators and ungrounded conductors within the coverage area.

3 seconds or less discharge time with ±10 volts offset voltage (balance) and meets the required limits for ionization use in electronics manufacturing areas per ANSI/ESD S20.20 and ESD TR53.

One 700 Lumen LED Panel Light (cool white). Adds additional light to operator work area for improved visibility.

3 position fan speed: Low, Medium, High

Ionization performance is consistent at all speeds and allows for use with sensitive applications, such as calibration, test, or repair procedures.

Sealed plenum air flow prevents contamination from being introduced to workstation.

Auto-feedback system (audible and visual alarm through single Tri-Color LED).

Unit will automatically shut down and alarm if/when supply voltage drops

120/220V input voltage selectable so unit can be used with 110V or 220V power sources.

Replaceable emitter pins allow for minimal downtime

NIST calibrated with certificate included.

Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology.

Made in the United States of America Chino, CA

Specifications

Typical positive and negative discharge times (1000V to 100V) measured using ANSI/ESD STM 3.1 are shown in the “Neutralization (Discharge) Times” section. The performance of the ionizer was measured with the unit positioned as shown, with the fan speed on high and without a filter.

Air Flow: Three speed fan (100 cfm – 200 cfm)

Balance (offset voltage): ±10 Volts Typical ±20 Volts Maximum (Temperature Range: 65°F – 80°F, RH: 15% – 65%)

Chassis: Powder coated steel

Dimensions: 770112 – 3.9″H x 6.6″W x 22.3″L (9.9 x 16.8 x 56.6cm)

Emitter Points 0.050″Diameter Made of pure tungsten for improved mechanical strength and ionization stability.

Fuse: 400mA slow blow

High Voltage Power Supply: 5.5kV DC nominal

Input Power: AC line power

Internally selectable for 100/120V – 50/60Hz or 220/230V – 50/60Hz

Ion Emission: Steady-state DC with sense feedback

Lights: 700 lumen each Cool white color 12 year estimated life expectancy (based on an average use of 10 hours per day)

Mounting: May be rigid-mounted or suspended from ceiling

Ozone: < 0.05 ppm

Weight 770112 – 7lbs (3.2kg)

Product Overview