SCS 770717 TB-9111 Static Sensor & Air Ionizer Test Kit

Portable Kit for Testing of Offset Voltage and Discharge Times of Air Ionizers and Electrostatic Fields, measures surface voltage and polarity on objects up to ±19.99 kV at a distance of 1″

Aluminum Conductive Plate, pairs with the SCS Static Sensor to measure offset voltage and discharge times for the periodic verification of ionizers per ANSI/ESD SP3.3 and ESD TR53

±1000V Charger, applies charge to the conductive plate to measure discharge times of air ionizers

Dissipative Enclosure with 7mm Ground Snap, grounds the meter when held by a grounded operator or bonded to ground using the included ground cord

Rotary Zero Knob, sets the zero-reference point with finely tuned precision

LED Range Indicator, assists with placing the meter at the correct distance from the object being measured

Hold Button, allows the measurements to be retained for easy reading and extends battery life

Carrying Case Included, utilizes a polypropylene enclosure and polyurethane foam insert to protect and store the instruments

NIST Calibrated with Certificate Included, calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology.

Made in the United States of America.

Test Kit Specifications

Conductive plate Assembly: Aluminum bracket, bare aluminum plate and Teflon spacers isolate plate from bracket

Voltage Output: 1/10,000 of measured voltage

Conductive plate Area: 2.95″ W x 1.18″ L; (7.5 x 3.0 cm)

Conductive plate Assembly Weight: 2.4 oz. (68 g)

Charger Dimensions: 1.1″ H x 2.6″ W x 4.5″ L; (2.8 x 6.6 x 11.4 cm)

Charger Weight: 5 oz. (140 g) with battery

Charger Power Requirements: One 9-volt alkaline battery: 1.1 kV minimum for ± voltage

Certifications: CE

Static Sensor Specifications

Performance Measurement Range: 0 to ±19.99 kV / inch

Performance Measurement Accuracy: Better than ±5% of reading, ±2 counts

Performance Measurement Stability: ±10 counts

Front Panel Mete Voltage Display 3-1/2 digit LED display

Sampling Rate 3 readings per second

Specifications

Ranging System LED distance indicator; aligned targets indicate 1″

Range LED distance indicator

Rotary Zero Knob Sets the zero-reference point

Low Battery Indicator An LCD icon indicates when the battery is low

Hold Switch Retains the LCD display reading when depressed

Dimensions: 0.9″ H x 2.8″ W x 4.9″L; (24 mm x 70 mm x 126 mm)

Weight: 4.9 oz. (140 g) with battery

Operating Temperature: 50 to 86°F (10 to 30°C)

Operating Relative Humidity: To 80%, non-condensing

Operating Altitude: To 2000 m

Certifications: CE

Power Requirements: Power One (1) 9-volt alkaline battery

Operating Time: Greater than 50 hours, with a new battery at 21°C continuous

Product Overview

More Information

SKU	I346278
Part No.	770717
Brand	SCS
Includes	Battery, NIST Certificate