Statguard 8453 Conductive Solvent-Free 2 Part Epoxy Flooring Adhesive Kit, 1 Gallon

Features and Benefits

Excellent Electrical – less than <1>6 ohms, per ANSI/ESD STD11.12

Superior indentation resistance

Fast-setting with easy trowelability

Superior bond strength

Industry Standards and Approvals

RFCI IP #1 – Recommended Installation Practice for Homogeneous Sheet Flooring, Fully Adhered

RFCI IP #2 – Recommended Installation Practice for Vinyl Composition Tile (VCT)

RFCI’s Recommended Work Practices for Removal of Resilient Floor Coverings

Where to Use

Interior commercial

Interior heavy commercial

Interior institutional

Limitations

Do not install over any substrates containing asbestos

Do not install when the moisture vapor emission rate (MVER) exceeds 8 lbs. per 1,000 sq. ft. (2.27 kg per 92.9 m2) per 24 hours, when using the anhydrous calcium chloride test (ASTM F1869)

Do not install with relative humidity of concrete slabs exceeds 80% (ASTM F2170)

Use only when the substrate temperature is between 65°F and 85°F (18°C and 29°C)

Suitable Substrates

Concrete and properly prepared cement terrazzo

Cement-based self-leveling underlayments and patching compounds

Approved wood underlayments (per manufacturer recommendations)

Embossing levelers applied over existing, properly prepared and fully bonded ceramic tile

A single layer of properly prepared, fully bonded VCT

Properly prepared and primed gypsum underlayments that meet the requirements for compressive strength according to ASTM F2419

Consult Statguard Flooring Customer Service for installation recommendations regarding substrates and conditions not listed.

Technical Data

Polymer Type: Epoxy

Percent Solids: 90% to 100%

VOC’s (Rule #1168 of California’s SCAQMD): 8 g/L

Pot Life: 40 minutes

Trowelability: Light, easy

Conductivity: 0.21 x 10⁵ (ohm) (10V)

Color: Black

Shelf life: 1-year when stored in original packaging at 73°F (23°C)

Storage Conditions: 40°F to 100°F (4°C to 38°C)

Flash point Part A:200°F (93°C)

Flash point Part B:200°F (93°C)

Protect from traffic: 24 hours for light traffic, 72 hours for heavy traffic

Product Overview

More Information

SKU	I221294
Part No.	8453
Brand	Statguard Flooring
Type	Two-Part Epoxy
Size	1 Gallon