TFS Label Air-Assist-Airless (AAA) 14 1 Peak™ Pump – Cart Model Set-Up (V Packing) with VIPER® AAA Spray Gun

Spray Pack

TFS Label Air-Assist-Airless (AAA) 14:1 Peak™ Pump – Cart Model Set-Up (V Packing) with VIPER® AAA Spray Gun

Manufacturer: Wagner

Part Number: TFSC14CART-VIPER-XX-XXX

Description:

AIR-ASSIST CART MOUNT OUTFIT 1/2″ INLET 5 GAL SIPHON

The Air Assist Airless pump from C.A.T. is an all stainless 14:1 ratio pump for production fine finish spraying of wood or other fine finish applications. The new 14:1 Peak™ Performance Series pump incorporates a new completely redesigned air motor that features a stationary magnet poised for endurance and longevity. This simple direct-acting valve is also resistant to icing, has a long-life carbon fiber cylinder, and integrated noise suppression design for quiet operation. The fluid section is all stainless featuring a non-contact pump tube that never wears out. Also featured is a cartridge-style piston seal and guide for quick field replacement. The unit has a large capacity solvent cup and 360-degree fluid inlet/outlet orientation.

The Air Assist Airless pump from C.A.T. is an all stainless 14:1 ratio pump for production fine finish spraying of wood or other fine finish applications and is 100% made in the US.

Specifications:

The pump offers a .33 GPM output for quick product changes with very little waste

The New 14:1 Peak™ Performance Series pump incorporates a new completely redesigned no stall air motor that features a stationary magnet poised for endurance and longevity

The simple direct acting valve is also resistant to icing

Has a long life carbon fiber cylinder and integrated noise suppression design for quiet operation

The fluid section is all stainless featuring a non-contact pump tube that never wears out

The unit has a large capacity solvent cup and 360-degree fluid inlet/outlet orientation

The upper seal is a V-Packing design for pre-cat lacquers, conversion varnish, and polyurethanes

Low 6 CFM air consumption

25 ft. x 3/16 in. Fluid Hose

25 ft. x 1/4 in. Air Hose

Includes GM4700 Gun

GM4700 Air Assist Tip – .413

Stationary magnet design

The enclosed solvent cup eliminates environmental contamination.

Sight gauges make it easier for checking and refilling lubricant levels.

5 Gallon Siphon Hose

This packing upgrade is included in our pump packages. It also has a flexible 5-gallon pick-up tube with a nylon inlet filter. Call for an optional 55-gallon pick-up tube.

This set-up comes with a robust pneumatic cart, not a “Pump on a Stick” like other brands along with a 25′ flexible set of hoses.

Hopper Option Available .

PROUDLY MADE IN USA.

Manual Aircoat Spray Guns –

Accessory & Replacement Part List:

Wagner Fluid/Air Hose Set

C.A. Technologies Repair Kit — Air Motor (Peak™ AAA)

C.A. Technologies Repair Kit — 14-1 Fluid Section

Inlet Strainer Screen, 3/8″

Pumps are built to order and can take up to 10 days to ship.

Manufacturer: Total Finishing Supplies

Part Number: Viper

Description: The VIPER® manual spray gun uses our Mix Tech spray technology to provide you with exceptional atomization, performance, value, durability, and finish quality. VIPER® is constructed with our aftermarket parts (Non-OEM) manufactured for the KREMLIN® Xcite® gun. The Viper spray gun boasts an 86% transfer efficiency. The VIPER® Mix Tech competes with other much higher-priced European Air Assisted Airless spray guns. VIPER® can be used with water-based or solvent-based coatings with fluid pressures up to 120 bar (1,740PSI).

Features:

• Material savings & environmental protection

• VIPER® is manufactured by an ISO9000 facility

• HVLP compliant

• Unsurpassed atomization and quality of spraying at almost half the price

• Lightweight and ergonomic design for outstanding performance

• Performance comparable to KREMLIN® Xcite® and uses our Non-OEM Aftermarket Standard and Ultra Fine Finish tips, seals, air cap, diffuser, fluid needle and spray gun filter screens

Reasons to choose the TFS VIPER® over any other Air Assisted Airless (AAA) on the market:

1. You have high standards and like saving money! The VIPER® Mix Tech delivers Top tier performance at a mid-market price while offering rugged durability and superior atomization.

2. Get more done with less coating and waste! High Transfer Efficiency for Air Assisted Airless! Testing has shown this gun to have 86% transfer efficiency.

“Why Pay for GOLD when you can save approx. 50% and go GREEN!“

Specifications

Fluid Inlet:	NPSM 1/4”
Compressed Air Connection:	NPT 1/4”
Max. Material Pressure:	120 bar (1,740 PSI)
Max. Material Temperatrue:	55°C (131°F)
Max. Air Inlet Pressure:	8 bar (116 PSI)
Operating Temperature Range:	5°–40°C (41°–104°F)
Weight:	0.6kg (1.3 lb)
Max. Sound Level:	82dB (A)

Literature

TIP CHART

Accessory Part List

• Non-OEM Standard Tips

• Non-OEM Ultra Series Fine Finish Tips

• Non-OEM VX24 Air Cap

• Non-OEM Aftermarket Tip Sieve Support

• Non-OEM Aftermarket 140 & 200 Mech Tip Sieves

Replacement Part List:

• 2.

• 3.

• 4.

• 5.

• 6.

• 7.

• 8. *

• 9.

• 10.

• 11B.

• 12.

• 13.

• 14.

• 15.

• 16.

• 17.

• 18.

• 18-2.

• 23-1. Mix Nozzle

• 23-2.

• 23-3. Air Cap

• 24-1 Pre-Atomized Nozzle ()

*= Included in 120 Bar Needle Kit, Complete

NO DISCOUNT CODES may be applied to this item

NOTES:

KREMLIN®, AIRMIX®, and Xcite® are registered trademarks of Sames Kremlin SA or Exel Industries SA, and the same companies may claim unregistered trademark rights in other words. The advertised parts are intended to fit KREMLIN® and Xcite® spray equipment. They are not, however, manufactured, endorsed, or sponsored by Sames Kremlin SA or Exel Industries SA or any of their affiliates, and no warranty by Sames Kremlin SA, Exel Industries SA, or any of their affiliates applies. Total Finishing Solutions, LLC is not affiliated with or sponsored or endorsed by Sames Kremlin SA or Exel Industries SA and is not one of their authorized distributors.

Click to view other products, parts, & accessories!