TFS Label Air-Assist-Airless (AAA) 14 1 Peak™ Pump – Cart with Compressor (V Packing) with MAMBA® AAA Spray Gun

Spray Pack

TFS Label Air-Assist-Airless (AAA) 14:1 Peak™ Pump – Cart with Compressor (V Packing) with MAMBA® AAA Spray Gun

Manufacturer: Wagner

Part Number: TFSC14COMP-MAMBA-XXX

Description:

AIR-ASSIST CART MOUNT OUTFIT WITH ON BOARD AIR COMPRESSOR 1/2″ INLET 5 GAL SIPHON

This pump is the ultimate in portability for finishers! The C.A.Technologies spray outfits are now available as a self-contained unit with 2 HP compressor, 4-gallon air tanks, and the AAA pump all packed nicely on a sleek compact cart, making it the most effective tool for any job any place.

The Air Assist Airless pump from C.A.T. is an all stainless 14:1 ratio pump for production fine finish spraying of wood or other fine finish applications. The new 14:1 Peak™ Performance Series pump incorporates a new completely redesigned air motor that features a stationary magnet poised for endurance and longevity. This simple direct-acting valve is also resistant to icing, has a long-life carbon fiber cylinder, and integrated noise suppression design for quiet operation. The fluid section is all stainless featuring a non-contact pump tube that never wears out. Also featured is a cartridge-style piston seal and guide for quick field replacement. The unit has a large capacity solvent cup and 360-degree fluid inlet/outlet orientation.

The Air Assist Airless pump from C.A.T. is an all stainless 14:1 ratio pump for production fine finish spraying of wood or other fine finish applications and is 100% made in the US.

Specifications:

The pump offers a .33 GPM output for quick product changes with very little waste

The New 14:1 Peak™ Performance Series pump incorporates a new completely redesigned no stall air motor that features a stationary magnet poised for endurance and longevity

The simple direct acting valve is also resistant to icing

Has a long life carbon fiber cylinder and integrated noise suppression design for quiet operation

The fluid section is all stainless featuring a non-contact pump tube that never wears out

The unit has a large capacity solvent cup and 360-degree fluid inlet/outlet orientation

The upper seal is a V-Packing design for pre-cat lacquers, conversion varnish, and polyurethanes

Low 6 CFM air consumption

25 ft. x 3/16 in. Fluid Hose

25 ft. x 1/4 in. Air Hose

Stationary magnet design

The enclosed solvent cup eliminates environmental contamination.

Sight gauges make it easier for checking and refilling lubricant levels.

5 Gallon Siphon Hose

2 HP on-board Air Compressor

4 Gallon Air Tank (Twin 2 gallon) gives plenty of atomizing air.

This packing upgrade is included in our pump packages. It also has a flexible 5-gallon pick-up tube with a nylon inlet filter. Call for an optional 55-gallon pick-up tube.

This set-up comes with a robust pneumatic cart, not a “Pump on a Stick” like other brands along with a 25′ flexible set of hoses.

Hopper Option Available .

PROUDLY MADE IN USA.

Accessory & Replacement Part List:

Wagner Fluid/Air Hose Set

C.A. Technologies Repair Kit — Air Motor (Peak™ AAA)

C.A. Technologies Repair Kit — 14-1 Fluid Section

Inlet Strainer Screen, 3/8″

Pumps are built to order and can take up to 10 days to ship.

Ships LTL – Extra fees may apply

Manufacturer: Total Finishing Supplies

Part Number: Mamba

Description: The MAMBA® Mix Tech 200 bar (2900PSI) manual spray gun delivers exceptional performance, value, and finish quality. With a high transfer efficiency, the MAMBA® Mix Tech competes with other much higher-priced Graco™ G40 RAC™ and G15 RAC™ spray guns.

Features:

• Material savings & environmental protection

• MAMBA® is manufactured by an ISO9000 facility

• HVLP compliant

• Unsurpassed atomization and quality of spraying at almost half the price

• Lightweight and ergonomic design for outstanding performance.

• Compatible/Replaces Graco™ G40 RAC™ and G15 RAC™ along with the

Reasons to choose the TFS MAMBA® over any other Air Assisted Airless (AAA) on the market:

1. You have high standards and like saving money! MAMBA® Mix Tech delivers Top tier performance at a mid-market price while offering rugged durability and superior atomization.

2. Get more done with less coating and waste! High Transfer Efficiency for Air Assisted Airless! Testing has shown this gun to have 86% transfer efficiency.

Specifications

Fluid Inlet:	NPSM 1/4”
Compressed Air Connection:	NPT 1/4”
Max. Material Pressure:	200 bar (2,900 PSI)
Max. Material Temperature:	55°C (131°F)
Max. Air Inlet Pressure:	8 bar (116 PSI)
Operating Temperature Range:	5°–40°C (41°–104°F)
Weight:	0.6kg (1.3lb)
Max. Sound Level:	82dB(A)

Literature

• TIP CHART

Accessory Part List

• Reversible Tip Guard and Retainer/Air Cap

• Non-OEM Tip Sieve Support

• Non-OEM 50 Mesh Tip Sieves

• Non-OEM 85 Mesh Tip Sieves

• Non-OEM 100 Mesh Tip Sieves

• Non-OEM 140 & 200 Mech Tip Sieves

• 25′ High-Pressure Fluid Line (select fittings when ordering)

• 25′ Air Line

Gun Replacement Part List

• Reverse Tip, Ultra Finish

• 2. Wedge

• 3. Fan Regulation Set

• 4. Pressure Wedge

• 5. Fluid Needle Gasket

• 6. Fluid Needle Screw

• 7. Air Valve, Complete

• 8. Needle Set

• 9. Air Valve Spring

• 10. Needle Spring

• 11A. Back Cap

• 12. Air Inlet 1/4″

• 13. Pin

• 14. Safety Lock

• 15. Trigger Pin

• 16. Trigger

• 17. Sealing Gasket

• 18. Gun Head

Pump Replacement Part List

Ref. No.	Part No.	Description
1a		Ball Valve 3/8”
1b		Ball Valve 1/4”
2		Interconnect Tube Assembly
3		Regulator Only
4		Pressure Gages Air Motor & Gun Air
5		Pump Protector Tube Assembly
6		Pump Mounting Bracket
7		Siphon Hose Assy 5 Gallon (Std) 3/8” L Vol
	*	Siphon Hose Assy 5 Gallon (Opt.) 1/2” H Vol.
	*	Siphon Hose Assy 55 Gallon (Opt.) 1/2” H Vol.
8		Siphon Hose Strainer 3/8” (Standard)
		Siphon Hose Strainer 1/2” (Standard)
8a		Strainer Screen
9		Fluid Hose Assembly 25ft. (YELLOW HOSE)
10		Air Hose Assembly 25ft. (RED HOSE)
12		Cart Assembly
13		1/4” Extension
14		Push on Hose Elbow 1/8”BSP X 6MM”OD Hose
15		6mm Tube (6 inches per section)
16		Push on Hose Fitting 1/8”NPTM X 1/4”OD Hose
17		Brass T-Fitting
18		1/4” Brass Coupling
19	53-525	Push on Hose Fitting 1/4”NPTM X 3/8”OD Hose
20		3/8” Tube (12 inches per section)
21		Push on Hose Elbow 1/4”NPTM X 3/8”OD Hose

* Siphon hoses 74-520 and 74-524 require 1/2” fluid inlet (P/N 74-118)

Note:

NO DISCOUNT CODES may be applied to this item

NOTES:

Not made by Graco®

Total Finishing Solutions, LLC is not affiliated with or sponsored or endorsed by Graco Inc. and is not one of their authorized distributors. Aftermarket non-oem replacement parts comparable to Graco® brand equipment are not manufactured or warranted by Graco Inc. or any of its affiliates.

Click to view other products, parts, & accessories!

Comparable to: 262929 24C857 249238 288465