Transforming Technologies IN1200-64 64″ Scion™ High-Performance ESD Ion Bar with Tungsten Alloy Emitters, 100/240V

AC Square Wave Technology – AC stability with DC control

AC Square Wave ionization technology uses bipolar emitters which provide both positive and negative ions. This results in less stress on the emitter points, compared with Pulsed DC ionizing bars. Pulsed AC emitter points last longer and stay cleaner and provide more uniform ionization.

AC Square Wave ion bars are also more effective than traditional AC ionizers which are fixed at 60Hz and useful only in close target proximity or when combined with significant air-flow.

Benefits of the Scion™ IN1200

AC Square Wave ion bars are also more effective than traditional AC ionizers which are fixed at 60Hz and useful only in close target proximity or when combined with significant air-flow.

Scion™ bars offer duty cycle control to provide optimal ion balance and decay times in a wide variety of conditions. Scion™ bars allows polarity switching frequency (pulse width) control for optimizing balance and decay times in many environments. Longer switching frequencies allow the ionizer to be useful in low airflow conditions or when moving ions a longer distance.

Pulsed DC bars require frequent maintenance, cleaning. Positive points deform quickly, affecting balance. Negative points collect micro-debris that must be frequently cleaned to assure performance.

Scion™ Display Unit

An external display is available which displays the bars settings. Use the IN1200-D to view the current switching frequency and duty cycle settings and adjust them to fit your specific application. Without the display, a charge plate monitor is recommended to assist with the bar settings. For use with the V2 Scion™ bars only. Check with Transforming Technologies for compatibility.

Mounting

The Scion™ IN1200 comes with simple to use E-Z mount clips that slide into grooves on the body of the ionizer. Use screws to secure the E-Z mount to the desired location.

Maintenance Friendly Ionizer

The Scion™ IN1200’s features patented molded emitter points that are easy to replace and service. The emitter point is enclosed in a plastic mold with threads that easily screws into the bar.

Verification and Calibration

The Scion™ ionizer comes factory calibrated and with a calibration certificate. Ionizer performance can be tested and verified with a charge plate monitor. Important tests to perform are positive and negative decay times and ion balance. It is recommended to test ionizer performance at least 1.0 per year

Specifications

Power Input: AC 100 to 240V, 50/60Hz

Output Voltage: DC+ 5.00(KV)

Output Frequency: 5, 30Hz (default)

Balance: +30 volts

Decay Time: 1000V-100V, < 2.0 seconds at 12"

Duty Factor: 10%-90%

Humidity: 70% RH (non-condensing)

Power: 10W

Indicators: Power: Green LED, Alarm: Red

Controls: Remote Control

Mounting: EZ Mount Brackets

Emitter Points: Tungsten Alloy

Gas Connection: 1/4″ quick release tube fitting

Warranty: 1-year limited warranty

Product Overview

More Information

SKU	I378477
Part No.	IN1200-64
Brand	Transforming Technologies