Transforming Technologies MT4500 Smooth Dual Layer Rubber Table Mat

The MT4500 Series Two-Layer Rubber ESD Table Mat is a made from durable 2-ply rubber. A conductive layer backs the static dissipative top layer that creates outstanding electrical performance characteristics. The 4500 Series offers excellent resistance to hot solders, soldering irons and most solvents.

MT4500 series ESD table mat is 0.080″ thick and available in 50′ long rolls in 24″, 30″, 36″, and 48″ widths. Pre-cut mat sizes are packaged individually with two (2) female 10mm snaps and a common point ground cord.

Meets or exceeds requirements of ANSI ESD-S20.20 and the recommendations of ESD 4.1

ESD Worksurface Mats:

Transforming Technologies has the most cost effective ESD rubber mats available. Order a Full Roll of rubber and cut pieces as needed or order Pre-Cut Mats in standard sizes or have us create custom mats to fit your workstation. All pre-cut ESD rubber mats come with a grounding hardware: a common point ground cord and 2 grounding snaps. Our low profile common point ground cord has two banana jacks which provide a ground point for two wrist straps.

Protect Your Work Surfaces:

Our ESD rubber table mats are the perfect solution for protecting tables from harsh processes. The mats offer excellent resistance to hot solders, soldering irons and most solvents. The mats are excellent for your production table because they are incredibly durable resisting scratching and gouging processes.

ESD Protection According to Industry Standards:

The MT4500 series matting provides reliable ESD protection for the life of the mat. The material has been independently tested and meets or exceeds all industry standards for worksurfaces.

All three styles of work surface mats supplied by Transforming Technologies meet the point-to-point and point-to-groundable point resistance requirements of ANSI/ESD S20.20-2014 when tested at both low and moderate relative humidity with a resistance meter. According to ANSI/ESD S20.20-2014, an acceptable work surface will have a point to point and a point to groundable point resistance of less than 1.0×10⁹ ohms.

Additional information

Color: Nasa Blue, Royal Blue, Gray, Green

Surface: Smooth

Material: NBR Rubber

Purpose: Table Mat

Thickness: 0.080″

Resistance: 8×10⁶-10⁸

Charge Decay: 0.01 secons

Size: 2′ x 50′, 30″ x 50′, 3′ x 50′, 4′ x 50′

How ESD Table Mats Work

An ESD mat is a very important part of an ESD protected area. ESD mats are designed to eliminate static on its surface and of objects placed upon it. It does this by having a conductive material embedded within the mat that collects the static and sends it to ground (earth). This is usually accomplished by connecting the mat to ground (typically the center screw of an outlet) with a ground cord. It’s important to discharge at a slow rate, therefore a resistor in the ground cord is recommended.

ESD table mats should have an electrical resistance of less than 10⁹ ohms. Testing your ESD mat regularly ensures that your workspace is free of damaging electrostatic charges. Test the resistance of the mats with a Surface Resistance Meter.

Product Overview

More Information

SKU	K101564
Part No.	MT4500
Brand	Transforming Technologies
ESD-Safe	Yes
ESD Properties	Dissipative
Thickness	0.080"
Material	Rubber
Surface	Smooth
Color	Gray, Green, NASA Blue, Royal Blue
Type	Dual-Layer