WAGNER® High Pressure Fluid Filter for IceBreaker Pumps (40–150 Series) – DN10 & DN12 Options

WAGNER® High Pressure Fluid Filter for IceBreaker Pumps (40–150 Series) – DN10 & DN12 Options

💸 Protect Your Equipment & Reduce Downtime
Contamination in high-pressure systems leads to clogged tips, poor finishes, and costly downtime. A proper fluid filter is one of the easiest ways to protect your investment and maintain consistent results.

Manufacturer: Wagner

Part Number:
2329024 (DN10 / 270 Bar / 3916 psi)
2329025 (DN12 / 530 Bar / 7687 psi)

Description: WAGNER® High Pressure Fluid Filter for IceBreaker Series Pumps

Maintain clean, consistent fluid delivery and protect your system with this genuine WAGNER® high-pressure fluid filter, designed for IceBreaker piston pumps from 40–150 series.

This filter helps remove debris and contamination from coatings, improving finish quality while protecting downstream components like spray guns and tips.

🔧 Key Benefits

• ✔ Protects spray guns and tips from contamination

• ✔ Improves finish quality and consistency

• ✔ Reduces clogging and downtime

• ✔ Built for high-pressure applications up to 530 bar (7687 psi)

• ✔ Direct fit for WAGNER® IceBreaker piston pumps

⚙️ Available Options

• DN10-PN270 – 270 Bar / 3916 PSI

• DN12-PN530 – 530 Bar / 7687 PSI

🏭 Compatible Systems

Designed for:

• WAGNER® IceBreaker 40 series

• WAGNER® IceBreaker 70 series

• WAGNER® IceBreaker 150 series

• Other compatible WAGNER® high-pressure piston pumps

📦 Specifications

• Manufacturer: WAGNER®

• Part Numbers:
  • 2329024 (DN10-PN270)

  • 2329025 (DN12-PN530)

• Application: High-pressure fluid filtration

⚠️ Important Note

Always match filter rating and pressure capacity to your system requirements. Contact us if you need help selecting the correct configuration.

📞 Need Help?

Our team can help you spec the correct filter for your pump and coating system.

The High-Pressure Filter is for High-Pressure Filter Version IceBreaker Spray Packs only (see list below). These High-Pressure Filters are made from stainless steel and mount directly onto the fluid outlet. They are designed for high flow rates.

Fits the following IceBreaker Outfits:

2393649 Wildcat Cart Mount

2393651 Wildcat Wall Mount

2393653 Puma Cart Mount

2393655 Puma Wall Mount

2393657 Leopard Cart Mount

2393658 Leopard Wall Mount

Parts and Accessories:

High Pressure Filter Model 2329024 (270 bar)

Ref. No.	Part No.	Description
1	2329024	HP filter DN10-PN270 SSt, complete
2	2324542	Filter housing
3	2324543	Union nut
4	2325826	Reducing double fitting with 2×60°
5	9955863	O-Ring
7	2324544	Distribution housing
8	169248 2356467	Relief valve Ball valve set (option)
10	9894245	Filter support
11	–	Filter cartridge *
	295721	* Filter sieve, 200 mesh per inch (fine)
	3514068	* Filter sieve, 100 mesh per inch (medium), mesh width 0.16mm
	3514069	* Filter sieve, 50 mesh per inch (rough)
	291564	* Filter sieve, 20 mesh per inch (rough)
12	3514058	Cone spring
13	2324552	Outlet pipe
21	2325562	Pressure ring d45
23	2323718	Hexagon plug
34	9992831	Loctite 542 50 ml; 50 cc
35	9998808	Mobilux EP2 grease
36	9992609	Anti-seize paste tube
37	9992616	Molykote DX grease

High Pressure Filter Model 2329025 (530 bar)

Ref. No.	Part No.	Description
1	2329025	HP filter DN12-PN530, complete (Stainless Steel)
2	2324542	Filter housing
3	2324543	Union nut
4	2330780	Fitting DF-MM-G1/2-G3/8-PN530-SSt
5	9955863	O-Ring
7	2324670	Distribution housing for ball valve
10	9894245	Filter support
11	–	Filter cartridge *
	295721	* Filter sieve, 200 mesh per inch (fine)
	3514068	* Filter sieve, 100 mesh per inch (medium), mesh width 0.16mm
	3514069	* Filter sieve, 50 mesh per inch (rough)
	291564	* Filter sieve, 20 mesh per inch (rough)
12	3514058	Cone spring
13	2328291	Fitting-DF-MM-R3/8-R1/4-PN530-SSt
20	2330156	Ball valve
21	2325562	Pressure ring d45
23	2323718	Hexagon plug
33	3204611	Double connector
34	9992831	Loctite 542 50 ml; 50 cc
35	9998808	Mobilux EP2 grease
36	9992609	Anti-seize paste tube