WHEELER-REX 8202 – Hot Tapping System 3/4″-2″ CTS, Plastic

WHEELER-REX 8202 Hot Tapping System for 3/4″, 1″, 1-1/2″, 2″ Plastic Pipe

The WHEELER-REX Hot Tapping System is hand operated and designed for drilling holes in active water lines up to 250 PSI. It is lightweight and easy for one person to set up and use. A built-in bleed-off valve allows chips to be flushed away.

Note: The 701440 arbor is for cutting larger holes in difficult materials. This arbor is to be used with 1-1/2″ & 2″ cutter shells for all three WHEELER-REX hot tap systems. The new arbor design has drive pins that align with holes in the large cutter shells for a stronger assembly.

Parts Diagram – Model 8202

Replacement Parts List

Item	Part No		Qty
1	801000	Hot Tap Body Assembly	1
2	700932	Extension	1
3	803001	3/4″ & 1″ Adapter Shaft	1
4	700933	Adapter, Short	1
5	6515	Ratchet, 1/2″ Sq. Drive Male	1
6	276392	11/16″ x 1/2″ 6 PT Socket	1
7	908095	1/4-20 x 1/4″ Cup Point Set Screw	1
8	908094	Pilot Drill	1
9	5800	3/4″ Cutter Shell	1
10	5801	1″ Cutter Shell	1
11	802050	3/4″ CTS Valve Adapter	1
12	802052	1″ CTS Valve Adapter	1
13	802084	1-1/2″ Shell Cutter	1
14	802085	2″ Plastic Shell Cutter	1
15	802056	1-1/2″ CTS Flare Adapter	1
16	802058	2″ CTS Flare Adapter	1
17	701440	Large Hot Tap Arbor Assembly	1

All Hot Tapping System Kits

MODEL#	8100	8102	8200	8201	8202	8203	8204	8205	8206	8209	8300
Pipe Sizes	3/4″	3/4″	3/4″	3/4″	3/4″	3/4″	3/4″	3/4″	3/4″	3/4″	3/4″
1″	1″	1″	1″	1″	1″	1″	1″	1″	1″	1″
	1-1/4″
	1-1/2″		1-1/2″	1-1/2″		1-1/2″		1-1/2″	1-1/2″
	2″		2″	2″		2″		2″	2″
Adapter Threads											BSPT
NPT	NPT
		CTS Flare	CTS Flare	CTS Flare	CTS Flare	CTS Flare	CTS Flare	CTS Flare	CTS Flare
									Compression
Pipe Materials	Steel	Steel	Steel								Steel
Copper	Copper	Copper								Copper
			Plastic	Plastic			Plastic	Plastic	Plastic
					Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron
					Ductile Iron	Ductile Iron	Ductile Iron	Ductile Iron	Ductile Iron