Cougar Air Assist Airless (AAA) Spray Gun

Cougar Air Assist Airless (AAA) Spray Gun

Manufacturer: C.A. Technologies

Part Number: Cxxx

Description: The C.A. Technologies Cougar Air Assist Airless (AAA) is a fine finish spray gun designed for production wood and metal finishing. Features include all stainless steel fluid passages, ergonomic design, integrated fluid filter, and easy trigger pull. Its superfine soft atomization is achieved with the precise geometry of the airless fluid tip and low volume air cap that mix at the locus of atomization which in turn will deliver the desired finishes at production speeds. The pump and gun system can be operated with only a small 1.5 hp compressor.

Specifications:

Includes 100 mesh inline filter
2500 psi maximum working pressure
Air Inlet – ¼” NPS (m)
Fluid Inlet – ¼” NPS (m)
Weight – 23 oz.
Requires 6 CFM
The standard tip is .011 X 40° angle, other tip sizes are available (available sizes from .007 to .021 with angles from 20° to 80°)

Features & Benefits:

100% stainless steel fluid passages, nozzle, and needle makes this spray gun perfect for water-based coatings.

This is an excellent atomizing spray gun that will provide a “class A” finish quality
Fast production speeds with +65% transfer efficiency making it a very efficient spray gun.

The Cougar provides better than 30% fan pattern width adjustment giving you added versatility on any project.

The Cougar has a very ergonomic handle design to fit comfortably in your hand
When the spray gun inlet air pressure is under 24 psi the air pressure coming out of the HVLP air cap on the front of the spray gun is less than 10 psi.

*(Please note that general tip recommendations can be found in the chart below. For safety reasons, only pair this spray gun with AAA Pumps that generate a maximum 2500 psi working pressure or less. For more detailed information on the spray gun such as parts, setup & maintenance, please review the part sheet).

Available (select from drop down menu)

– CA Tech Air Cap, HVLP

– Series 100H Air Cap Retaining Ring

– CA Tech AAA Tips

– Filter Element

– Needle Assy

Spare Parts:

Ref. No.	Part No.	Description
1		Nozzle Body
2		Seat
3		Seat Retainer
4		O-Ring*
5		Air Cap Adapter
6	66-102	Nozzle Carrier
7		O-Ring*
8	66-101	Gun Body
9		Fan Control
10		Air Cap Ring
11		Air Cap
12		Fluid Tip
13		O-Ring*
		Tip Strainer (Optional)
14		Air Valve
15		Gasket
16		Rear Bushing
17		Trigger Pivot Assembly
18	60-125	Air Valve Gasket
19		Air Valve Spring
20		Needle Seal Cartridge**
21		Fluid Tube Assembly
22		Trigger
23		Upper Filter Housing
24		Handle Plug
25	60-208	Spring
26	66-137	Spring Seat
27		Fluid Control Knob
28		Filter (100 mesh standard)
		Filter (60 mesh optional)
29		Bracket
30		Air Inlet
31		Screw
32		Filter Housing, Lower
33		Filter Retaining Nut
–		Gun Repair Kit (soft seals only)
–		Repair Kit

Tip Size	Orifice	Angle	Pattern Width	General Coating Type
.409	0.009	40 deg	3-9 inches	Conversion Varnish & Pre-Cat Lacquers
.411	0.011	40 deg	3-9 inches	Conversion Varnish & Pre-Cat Lacquers	* Standard Tip
.511	0.011	50 deg	3-10 inches	Conversion Varnish & Pre-Cat Lacquers
.611	0.011	60 deg	4-12 inches	Conversion Varnish & Pre-Cat Lacquers
.413	0.013	40 deg	3-9 inches	Oil Based Enamels & Pre-Cat Lacquers
.513	0.013	50 deg	3-10 inches	Oil Based Enamels & Pre-Cat Lacquers
.613	0.013	60 deg	4-12 inches	Oil Based Enamels & Pre-Cat Lacquers
.515	0.015	50 deg	3-10 inches	Primers
.615	0.015	60 deg	4-12 inches	Primers